OHAUS WiFi / Bluetooth Manual página 4

EN-2
2. Click the WiFi tab, then click Read button to active
the Search and Connect buttons.
3. Click the Search button. You can see several WiFi
options appear on the window.
4. Select the exact WiFi site and click Connect button.
5. Input the password and click OK button.
NOTE:
The character status changes from "Connecting" to

"Connected" indicates that the connection is
successful.
The IP address can be checked from the

menu of the terminal.
3.2 Bluetooth Setup
The terminal can be set to the Bluetooth type in the wW.I.-b.t menu. You can use the Type-C USB cable to
supply power to the scale.
Steps
1. Long press the Menu button until mM.E.N.U appears on the display.
Release the Menu button, and C.A.L appears on the display.
2.
3. Short press the No button several times until wW.I.-b.t appears on the display.
4. Short press the Yes button, and r.E.S.E.t appears on the display.
Short press the No button once, and tYPE appears on the display.
5.
6. Short press the Yes button to enter the sub menu.
7. Short press the No button several times until Bluetooth appears on the display.
Short press the Yes button
8.
To pair the PC with the scale via Bluetooth:
1. Click Settings on the PC.
2. Select Devices (Bluetooth, printers, mouse) in the pop-out Settings window.
Click Add Bluetooth or other devices.
3.
4. Select Bluetooth in the popup window, then the PC searches the available Bluetooth devices.
5. Select the exact Bluetooth device to pair.
wW.I.-B.t
Wi-Fi/Bluetooth USB Host