Publicidad
Idiomas disponibles
Idiomas disponibles
Step 6: Attach the handle on diaphragm with stem
by hooking the U- shape hole in the groove of the
stem. Push down the handle onto the seal seat until
its well placed.
Step 7: Insert the seal seat in the hole of the connector
and screw the seal seal clockwise until it is securely fixed.
PUMPING
Relax in a comfortable chair (you may wish to use
cushions to support your back).
Press the assembled pump body against your breast.
Make sure that your nipple is centered.Hold the
breastshield onto your breast with your thumb and
index finger. Support your breast with the palm of your
hand. Gently start to press down the handle.
Note: Do not worr y if your milk does not
flow immediately. Relax and continue pumping.
Repositioning the breast pump on your breast from time
to time can help stimulate milk flow. Try to express at
4
another time during the day.
If the process becomes very uncomfortable or painful,
stop using the pump and consult your breastfeeding
advisor.
Close the bottle with a lid after pumping Disassemble
and clean the parts that contact breast and milk.
Do not continue pumping for more than 5
minutes at a time if you do not succeed in expressing
any milk. Use bottle holder to prevent the bottle from
tipping over. Do not fill the bottle too full to o prevent
overfilling and spillage.
SIZE OF BREASTSHIELD
Make sure that your nipple fits correctly in the breast
shield. Not too tight, it is important that the nipple can
move freely, while expressing breast milk.
The breastshield should not be too large, because this
can cause pain or less effective expression.
If there is any pain or discomfort during pumping,
please consider to choose a larger or smaller size.
Publicidad
