Priority Auping Manual De Instrucciones página 32

8. Then use the + and -- keys to set
the minutes. Again press SET to
confirm. A single tone will sound as
soon as the program is installed.
The saved program will now start (one
time only).
Starting the program every day
You can also choose to have the
program run daily.
1. Press and release programming
key P.
2. Press the key for the external
switch.
3. Select by pressing the + key 'on
AUTO'.
4. Press confirmation key SET once to
change the starting time.
The display shows 'on'.
5. Press the + and -- keys to set the
starting time. First set the hours for
the starting time.
Press SET to confirm.
6. Then use the + and -- keys to set
the minutes. Again press SET to
confirm. The display shows 'off'.
7. Press the + and -- keys to set the
time the program should end. First
set the hours.
Press SET to confirm.
GB8
8. Then use the + and -- keys to set
the minutes. Again press SET to
confirm.
The set programme will now start and
stop daily at the programmed times.
4.3.3 Temporarily disabling the
AirMassage program
Once the AirMassage program has
been set, it will switch on each day at
the preprogrammed time. If, for
example, you go on vacation or are
not at home for an extended period of
time, you can disable the switching on
of the program.
1. Press and release programming
key P.
2. Press the AirMassage key. The
symbol in the display starts
flashing.
3. Choose 'off'.
4. Press confirmation key SET.
4.3.4 Exiting the program without
saving the settings
If you accidentally
programming keys or if you are in the
program but want to exit from the
program without saving the settings,
press P again to exit. You can also
automatically exit from the program by
not touching any buttons for ten
seconds.
pushed the