Publicidad
Idiomas disponibles
Idiomas disponibles
3. Use guidelines
The device is designed to sterilize and recondition items with high temperature.
The product is outside the scope of MDD93/42/EEC regulations for medical devices.
The product is intended for home use only.
The user is liable for any damage resulting from unintended use of the device.
3.1.
Device description
3.2.
Preparing for use
APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative humidity should be less
than 85%. Ensure good ventilation in the room in which the device is being used. There should be at least
10 cm distance between each side of the device and the wall or other objects. The device should always be
used when positioned on an even, stable, clean, fireproof and dry surface, and be out of the reach of
children and persons with limited mental and sensory functions. Position the device such that you always
have access to the power plug. The power cord connected to the appliance must be properly grounded
and correspond to the technical details on the product label.
3.3.
Device use
1. Connect the device to power supply.
2. Place the items to be sterilized inside the device, taking care not to overlap.
3. Close the device cover.
4. Set the device operation time – the time indicator will light up.
5. Set the operating temperature of the device – the temperature indicator will light up.
IMPORTANT! Never open the device during operation!
6. Both control lights will turn off when work is completed.
7. After finishing work, disconnect the device from power supply.
8. After sterilization, remove the tray using the rings:
EN
1 – Temperature control knob
2 – Temperature indicator light
3 – Time indicator light
4 – Timer knob
Publicidad
