Abus PPIC91600 Guía Rápida página 16

S T A R T - U P
Please make sure of the following for operation with solar panel:
App
- App2Cam Plus -
16
• Your base station and Battery Cam Pro must have the latest firmware
version installed.
Do you want to check the version? In the app, go to the path:
Camera overview -> Live view -> Camera settings -> Device settings ->
Search for firmware update
The points you need to pay attention to when updating the firmware via
the app are described in the operating instructions for the Battery Cam Pro.
• In the settings of the Battery Cam Pro connected to the solar panel,
the operating mode must be set to "Solar".
For this, go to the following path in the app:
Camera overview -> Live view -> Camera settings ->
Camera 1/2/3/4 settings -> Operating mode
English