Grundig WET & DRY MT 8240 Manual Del Usuario página 31

OPERATION_______________________________
Trimming_hair_or_beard_to_
a_certain_length
Please use the comb attachments
6
.
1 If necessary, remove the attachment
by pressing in both side catches
and lifting off.
2 Insert attachment
7
or (width 30 mm) carefully at the
top and press down until it clicks into
place.
Note
The comb attachments fit both cutting
7
heads.
comb attach-
ment 4
comb attach-
ment 5
comb attacht -
ment 6
3
Push the comb attachment carefully
and firmly onto the rounded rear half
of the cutting head from above and
let it click into place.
A
(width 38 mm)
2 mm
10, 12, 14, 16 mm
2, 4, 6, 8 mm
4
to
B
Note
To adjust the small and large adjust-
7
able comb attachments 5 and 6
press the button in the middle of
each attachment and push it up or
down.
4
Press the
appliance and start trimming.
5
Press the
appliance after use.
6
After use, remove the comb attach-
4
ment
ing tab at the back and lifting the
comb attachment.
Thinning_out_hair
1 If necessary, remove the attachment
by pressing in both side catches
and lifting off.
2 Insert attachment
7 (width 30 mm), put comb attachment
4
(width 2 mm) carefully at the top
and press down until it clicks into place.
3
Press the
appliance and start thinning out your
hair.
C
button to switch on the
C
button to switch off the
6
to by pressing the lock-
A
(width 38 mm) or
C
button to switch on the
ENGLISH
B
31