Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
Risk of burns!
When working on the storage
system:
▶ Take off metallic jewelry.
▶ Turn off the storage system.
▶ Use insulated tools.
▶ Wear personal protective
equipment, including safety
glasses, insulated gloves, and
safety shoes.
The battery modules installed in the storage
system are protected by multiple protective
devices and can be operated safely. Despite their
careful design, the battery cells inside the battery
modules may corrode or experience thermal
runaway in the event of mechanical damage, heat
or a fault.
Conduct in case of fire
Fire may occur with electrical equipment
despite its careful design. Likewise, a fire in the
vicinity of the equipment can cause the storage
system to catch fire, releasing the contents of the
battery modules.
In the event of a fire in the vicinity of the
product or in the storage system itself, proceed as
follows:
▶ Only firefighters with appropriate protective
equipment (safety gloves, safety clothing, face
guard, breathing protection) are permitted
to enter the room where the burning storage
system is located.
There is a danger of electrocution when
extinguishing fire while the storage system is
switched on. There, before starting to extinguish
the fire:
▶ Switch off the storage system to electrically
isolate it.
▶ Switch off the main switch in the building.
If the storage system and/or main switch cannot
be safely switched off:
▶ Observe the minimum distances specified
for the extinguishing agent used. The storage
system works with an output voltage of 230 V
(AC) and is therefore considered a low-voltage
system.
• A storage system fire can be extinguished using
conventional extinguishing agent.
• Water is recommended as an extinguishing
agent in order to cool the battery modules and
therefore, prevent thermal runaway in battery
modules which are still intact.
9
Publicidad
