Publicidad
Idiomas disponibles
Idiomas disponibles
(B2) Use on mobile phones
Make a call:
Dial a phone number from the phone book on your mobile phone or enter it directly, and when Bluetooth is
switched on, the call is automatically made via the headset.
Answering an incoming call
When the headset is connected to the phone and turned on, a ringtone will sound on the headset's speakers
when a call comes in. Press the multi-function button (2) 1x briefly to answer the call.
Please wait for the beep to make sure that the audio connection is complete.
End call
To end an existing conversation, briefly press the multi-function button (2) 1x.
Rejecting an incoming call
When the headset is connected to the phone and turned on, a ringtone will sound on the headset's speakers
when a call comes in. Press and hold the multi-function button (2) to reject the call.
Mute microphone
You can mute the headset by pressing the mute button (6) on the headset headband. Pressing the button again
turns the microphone back on.
(C1) Setup on PC/Mac:
Put on the headset and adjust it to the shape of your head so that it fits perfectly.
Connect a Bluetooth dongle to an available USB port, or use the built-in Bluetooth if your device has one.
You should see the following messages:
a. Device is set up
b. The device is ready for use
Move the slider on the headset from the "OFF" position to "ON" to turn on the headset.
You should now hear the "Power on, pairing" announcement and the LED on the headset will flash red/blue
alternately.
If you don't hear an announcement, the headset may not be sufficiently charged. In this case, slide the slider on
the headset back to the "OFF" position and charge the headset with the supplied USB cable. The LED lights up
solid red when charging and changes to blue when the headset is fully charged. After the headset is charged,
unplug the charging cable and then repeat steps 1-3.
Press the Bluetooth icon in your status bar:
Next, click on "Open Settings"
Click on "Add Bluetooth or other device"
22
Publicidad
