Publicidad
Idiomas disponibles
Idiomas disponibles
~.. PART-5 .. Galculator Functions
To perform constant calculations
3 (4) 2
2.
ea
ey!
8
To correct errors in-calculations
About calculation errors...
Whenever 'an error occurs, the indicator "E" appears on the display.
The following conditions all result in errors.
exceeds 10 digits.
CE) 68
Enter the Calculator Mode.
= 8). .
You can repeat the above operation as many times, 'as
x
"Periorming. date calculations=
* When the :number of.digits in 'the mantissa of.a value stored in merhory
' exceeds 10 digits. In this case,the
SF.Unit automatically retains the last value
stored that did not exceed 10 digits.
:
*
Division by zero.
cS
To clear errors
Press C to continue with the same calculation. Ity you want to clear the calculation
and start again, press AC.
Performing date calculations
The SF Unit lets you perform calculations involving dates within the range of
January 1, 1901 through December 31, 2099. If you try to use dates outside this
range, ihe "E" indicator appears on the display to indicate an error. Note that you
Can use constant calculation techniques and calculation memory when perform-
ing date calculations.
2, -Enter the later date, pressing TIME DATE afentig year
and month entries. - 5... ..
1998/7 3
3. Press — for the subtraction operation.
Publicidad
