General safety
WARNING — Do not store explosive substances such as aerosol cans with a flammable
propellant in this appliance.
WARNING — If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
WARNING —Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
WARNING — Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
WARNING — Do not damage the refrigerant circuit.
WARNING — Do not use electrical appliances inside the beverages' storage compartments
of the appliance, unless they are of the type recommended by the manufacturer.
WARNING — The refrigerant and insulation blowing gas are flammable. When disposing of
the appliance, do so only at an authorized waste disposal center. Do not expose to flame.
Refrigerating fluid
The refrigerating circuit in the appliance uses refrigerating isobutane (R600a), which is a
highly inflammable natural gas and is therefore dangerous for the environment. When
transporting or installing the appliance, ensure that no element of the refrigerating circuit is
damaged. The refrigerating fluid (R600a) is inflammable.
Caution: Fire risk
If the refrigerating circuit is damaged:
▪ Avoid open flames or any source of combustion.
▪ Ensure that the room in which the appliance is installed is well ventilated.
It is dangerous to alter the specifications or modify this product in any way. Any damage to
the cord may cause a short circuit, fire, and/or electric shock.
Electrical safety
• We cannot be held responsible for any incident caused by improper electrical
installation.
• The power cord must not be extended. Do not use an extension cord, adapter or
multiple sockets.
• Make sure that the power plug is not crushed or damaged. A crushed or damaged
power plug may overheat and cause a fire.
• Make sure that you can access the main plug of the appliance.
• Do not pull the main cable.
• The power cord must not be lengthened.
• Never remove the ground connection.
• If the power plug socket is loose, do not insert the power plug. There is a risk of
electric shock or fire.
17