Publicidad
Idiomas disponibles
Idiomas disponibles
AP Installation (Access Point Mode)
Once connected to the 2.4ghz Wi-Fi, open the Energeeks 3.0 app and
follow the steps below:
•
In the application, press the "+" in the upper right corner and
select "add device".
•
Select Smart wifi plug and press next.
•
Enter the password of the detected Wi-Fi network and press
Next.
•
In the upper right corner, tap EZ mode and select AP mode,
then follow the prompts in the app.
Important: The intelligent functions of current routers may prevent
the device from connecting, even if all the steps are correct. They can
also cause a device to go offline from time to time for no apparent
reason.
If this happens to you, please contact our technical support service.
21
Publicidad
