Airzone Aidoo Zigbee AZAI6ZBE Serie Manual De Instrucciones página 7

ASSEMBLY AND CONNECTION
ASSEMBLY
Perform the assembly by fixing your Aidoo Zigbee close to the AC unit to be controlled using
the material supplied:
a.
Screw attachment.
b.
Double-sided adhesive attachment.
a.
CONNECTION
General considerations to connect the Aidoo Zigbee:
1. Important: Some Aidoo Zigbee requires to be supplied by a limited power source meeting
class PS2 of the standard IEC 62368-1. Refer to the data sheet the for further information.
2. Important: Use separate circuits for the unit that is to be controlled and the power supply to
the system.
3.
Disconnect the indoor unit. Perform all of the connections with a total absence of power.
4. Connect the Aidoo Zigbee to the indoor unit according to the instructions detailed in the
data sheet of your specific Aidoo Zigbee reference.
5. Power the indoor unit. Check the LEDs (see Self-diagnosis section).
6. Configure the device.
b.
EN
7