Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
13.
The following table shows fault symptoms and describes remedial measures in the event of your machine failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault
Motor does not run
Reduced vacuuming power
24 | GB
Possible cause
Check whether the plug is plugged in.
Check whether there is power to the socket.
Check whether the vacuum cleaner on/off
switch is switched on.
Device blocked?
The filter must be cleaned.
Is the filter full of dust?
www.scheppach.com
Remedy
Plug the mains plug back in to
the socket.
Call an electrician.
Switch the on/off switch on.
Remove the blockage.
Clean the filter.
Remove and empty the filter.
Publicidad
