Operation; Connections - Pioneer DDJ-SZ Manual De Instrucciones

Operation

Connections

1 Connect headphones to one of the [PHONES]
terminals.
2 Connect powered speakers, a power amplifier,
components, etc., to the [MASTER OUT 1] or [MASTER
OUT 2] terminals.
To output the sound from the [BOOTH] terminals, connect speak-
ers or other devices to the [BOOTH] terminals.
For details on connecting the input/output terminals, see the
Operating Instructions.
3 Connect this unit to your computer via a USB cable.
USB cable
(included)
This product satisfies electromagnetic noise
regulations when it is connected to other equipment
through shielded cables and connectors.
Use only the furnished accessory connecting cables.
4 Turn on the computer's power.
Powered speaker, etc.
D44-8-2_A1_En
5 Connect the power cord.
6 Press the [ ] switch on this unit's rear panel to turn
this unit's power on.
Turn on the power of this unit.
For Windows users
The message [Installing device driver software] may appear
when this unit is first connected to the computer or when it is
connected to a different USB port on the computer. Wait a while
until the message [Your devices are ready for use] appears.
7 Turn on the power of the devices connected to the
output terminals (powered speakers, power amplifier,
components, etc.).
When a microphone, DJ player or other external device is con-
nected to input terminals, the power of that device also turns on.
To power outlet
Power cord
(included)
11
En