Kenmore 758.144161 Manual Del Usuario página 10

Replacement and Care of Filters (conrd.)
5. a. Install new filter (32-14912) in the
bottom of the cabinet.
NOTE: The new filters will only fit into the
cabinet one way. Take note of the inner
cabinet detail where the filters sit. Each
pair of filters must be positioned so the
glue beads face out from each other.
Refer to Figure 5a.
b. Place the filters into the bottom of
the cabinet so the open pleats slip
over the tabs in the bottom of the
cabinet. Repeat for other side.
c. Reposition top filter housings on top
of filters and snap into front filter
housings,
d. Position fan assembly onto the
cabinet. Make sure the fan venturi
(lowest cylinder section below the
fan) is placed inside the top filter
housings.
e. Close the pivoting Iid on the fan
assembly,
f. The unit is ready for use or to be
stored away for next season.
Tabs
\
s
Front Filter Housing
Front of Humidifier
Figure 5a - Filter Locations Marked X
Top Filter Link Arm
Assembly
Tab on Front Float
FHter Housing Assembmy
Front of Humidifier
(Top View}
10