Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATINGINSTRUCTIONS
4.CONTROL
PANEL(Only
forelectronic
models)
Caution:
If airconditioner
is shutoff,
wait aminimum
of threeminutes
before restarting
B_
C
D
_
Control
Functions
Air Exchanger: Circulates freshair and hetpsremove stale airwhen in theopen position. Maximumair circulation and
cooling occur when in the closed position.
ON/OFF button
The air conditioner will be started when it is energized or will be stopped when it is in operation, if you press
this button.
MODE button
Each time MODE button is pressed, the operation mode is changed in sequence:
COOLING
FAN ONLY
ENERGY SAVING
COOLING
NOTE: After setting the mode, allow 3 minutes before switching to another mode.
FAN SPEED
button
Used to select fan speed
in sequence
auto, low, medium
and high.
TIMER
button
Used to set or cancel
timer
operation.
When
the unit is in operation,
you can set OFF TIMER.
When
the unit is off, you can set ON TIMER.
Timer
setting
range is 0 to 24 hours.
If the OFF TIMER is set, the timer LED displays the remaining time to turn off the unit for only 12 seconds,
then LED shifts to display set temperature.
If you press TIMER button within the 12 seconds, OFF TIMER will be canceled.
If the ON TIMER is set, the timer LED displays the remaining time to turn on the unit.
If you want to cancel ON TIMER, press TIMER button.
•
•
Button
Used to set room temperature
in COOLING
mode
or used to set time in TIMER
mode.
if the two keys are pressed
at the same time,
the temperature
LED display
will alternate
between
°C and °R
NOTE:
Temperature
setting
range is from 19°C
(66°F) to 31 °C (88°F).
Indication
symbols
of LED on control
panel:
_)
Auto fan speed
_
Cooling
0 0 "F
J l I IHR
Low fan speed
_
Fan only
Display set temp
(_
Medium fan speed
{_
Timer
Display set timer
High fan speed
-CE Energy-saving
The above LED lights are shown
when the relevant
mode is in use.
Publicidad
