Rena Ware AQUA NANO EXTREME CTU-500 Uso Y Mantenimiento página 18

2. Open the housing by turning the top counterclockwise and remove the Main Filter
media by pushing it forward and twisting until releases. Discard the used Main Filter
Media Insert.
3. Wash the reusable housing with mild soap and insert the new Main Filter media
Insert with the punt up and close until the arrows marked on the housing are aligned
and reinstall.
4. Run water for 2 minutes expel trapped air and charge it. (See "CHARGE THE SYSTEM"
section).
Resetting the flow meter
When replacing the Main Filter Media Insert, the flow meter has to be reset. Using a pencil
or pen point press the red button on the bottom of the base for 5 seconds and wait for the
indicator lights to fire a flash sequence.
18
punt
outlet nipple