Canyon Interceptor CND-SGHS8A Manual Del Usuario página 7

EN
HEADSET USE
Put the headset on your head as shown in figure b. Use the auto-adjusting headband
to adjust the position of the headphones on your ears until they are in the most
comfortable position. The position of the microphone can be adjusted by a flexible
holder. It is recommended to place the microphone at the corner of your mouth. In
this case, the voice will be transmitted clearly, and you will not hear breathing.
SAFE USE RULES
1. Set the headset volume control to the minimum level before using the headset.
This will help to avoid hearing damage due to sudden exposure to sound at
maximum volume.
2. Do not use the headset in situations that require concentration.
3. Do not disassemble or attempt to repair the headset yourself.
4. Do not drop, throw or bend the device.
5. Clean the headset of dirt with a soft cloth lightly dampened with water. Do not use
soap or strong detergents.
6. Do not pull on the cable when disconnecting the headset.
TROUBLESHOOTING
The speakers do not work. Check the volume levels on the headset volume control
and on the audio source. Make sure that the headset is selected as the default
playback device.
The microphone does not work. Make sure that the audio source is set to the
correct microphone sensitivity level. Make sure that the headset microphone is
selected as the default recording device. Check system privacy settings that may
restrict microphone use.
Also check the connection of the plugs. Check the cable and plugs for damage. If
you connect the headset to your computer, update the audio device drivers. If these
recommendations do not help, check that the headset is working properly. To do so,
connect it to another sound source. If the headset does not work, contact the point
of purchase.
WARRANTY CONDITIONS
The warranty period is calculated from the date of purchase from an authorized
Canyon brand Seller. The warranty period is 1 year. The service life is 2 years if
otherwise is not
canyon.eu/warranty-terms.
OTHER INFORMATION
All information contained herein is subject to amendments without prior notification
of the User. For current information and details on the device description and
specification, connection process, certificates, warranty and quality issues see
relevant Installation and Operation Manuals available for downloading at
canyon.eu. All trademarks and brand names are the property of their respective
owners.
Made in China.
Directive 2014/30/EU on electromagnetic compatibility of equipment. For more
information visit canyon.eu/certificates.
Manufacturer/Importer/distributor: ASBISc Enterprises PLC, Iapetou, 1, Agios
Athanasios, 4101, Limassol, Cyprus. Tel.: +357-25-85-70-90, asbis.com.
6
required by local law. For more information visit