Hitachi RAK-18QXB Manual De Instrucciones página 24

WEEKLY TIMER OPERATION
It is possible to select Mode A or Mode B. For each mode, up to 6 programs can be set per day. In total, a
●
maximum of 42 programs can be set for a week for each mode.
If calendar and clock are not set, the reservation setting for WEEKLY TIMER cannot be set.
●
If calendar and clock are not set correctly, WEEKLY TIMER will not operate correctly.
●
Reservation for calendar and clock shall be set fi rst before operating WEEKLY TIMER.
●
Step 1 : Set the reservation schedule to the remote controller. Send the registered reservation to indoor
unit and then operate.
Step 2 : Select Mode A or Mode B and activate or deactivate WEEKLY TIMER .
Step 3 : Copy and cancel the reservation schedule.
Step 1 : Set reservation schedule to the remote controller. Send the registered
reservation to indoor unit and then operate.
■ How to set a WEEKLY TIMER.
1. Select Mode A or Mode B
1
Press
display. (Mode A is selected).
2
Press
(Mode B is selected).
If no reservation has been made, ON/OFF,
●
If reservation has been made, ON/OFF,
●
appear.
2. Set a program
Press
can be changed.
, day: Mon, program no. : 1, ON/OFF, setting time and setting
temperature blink on the display.
3. Select the desired day of the week
Press
The day changes from Mon
3
Mon, Tue, Wed, Thu, Fri, Sat, Sun [Full days]
Fri [weekday]
Select [Full days] for daily reservation.
Select [weekday] for Monday to Friday reservation.
Select [weekend] for Saturday and Sunday reservation.
After reservation has been set, it is easy to check and edit at the same
●
time.
4. Press
The number changes from 1
If program number has been set, follow above in order to make
●
4
changes.
(WEEKLY) button.
(WEEKLY) button again,
(WEEKLY) button for about 3 seconds. The selection mode
(DAY) button.
Tue
Sat, Sun [weekend]
button to select a program number.
2
– 20 –
lights up. and blink on the
and blink on the display.
,
,
Wed Thu Fri Sat
Mon, Tue, Wed, Thu,
Mon Tue ......
3 4 5 6 1
appear.
will not
Sun
2 .....