RBC-3100
FeAtuReS
Front Loading
The sophisticated front loading system provides easy access to hopper, allows larger hopper capacity, and is more durable
than a back loading system.
Automatic Self-test
The machine will automatically perform a self-test when it is turned on. If there is a problem, the preset display will show an
error code. (See ERROR CODE DISPLAYS.)
Auto and Manual Start Modes
The machine is preset to automatically start counting bills once placed into the hopper. To change to the manual start
mode, press MNL, insert the bills into the hopper, and press RESTART.
uV Counterfeit Detection
Counterfeit bills often use white or bleached paper, which will glow under ultraviolet light. To use ultraviolet counterfeit
detection, press UV. When the UV detector finds a counterfeit bill, the machine will stop counting to allow removal of the
counterfeit bill and display the error code on the preset display. To resume counting, simply press RESTART.
Magnetic Counterfeit Detection
If the magnetic detector does not find the presence of magnetic components that are standard in authentic bills, the
machine will stop counting to allow removal of the counterfeit bill and display the error code on the preset display. To use
magnetic counterfeit detection, press MG. To adjust magnetic sensitivity level, press LEVEL for low, medium, and high. To
resume counting, simply press RESTART.
Dimension Detection
The dimension detector measures the width of the center of each bill by using infrared light. If the detector finds an odd-
sized bill, the machine will stop counting to allow removal of the bill and display the error code on the preset display. To use
dimension counterfeit detection, press DD. The dimension (DD) counterfeit detection sensitivity level is preset on level 1
(highest level).To adjust width sensitivity level, press SET and select 1-5, 1 for highest, 5 for lowest.
To adjust width sensitivity level, press SET and select 1-5, 1 for lowest, 5 for highest.
7