Klarstein 10032813 Manual Del Usuario página 18

EN
18
WALL MOUNTING INSTRUCTIONS
1
Take out the 4 x metal wall mounting
brackets and 4 x metal screws for wall
mounting brackets from attachment.
Fix these brackets onto the back of the
product.
3
Insert the plastic dowels fitting into the
holes.
2
Mark the positions of the four holes
to be drilled on the wall, and drill
the holes with the drill bit. Make
sure the distance between each
holes is same as the round holes on
the wall mounting brackets.
4
Insert the 4 x metal screws for wall
mounting into the plastic dowels.