Cleaning and Maintenance
Parts cleaning
Notes
1. The filter parts must be dried after cleaning before they can be put back to use. It is
recommended to dry in the sun for 24 hours to ensure that they are completely dry;
2. All components must be installed in place, or else it will cause product failure;
3. Prevent water from infiltrating into the electrical components of the vacuum cleaner,
or else it may cause product failure.
1. Remove the filter assembly, hold the metal mesh part with one hand and rotate in the
indicated direction with the other hand to remove the HEPA;
2. After cleaning and fully drying all the parts, assemble them in place in the reverse
order to prevent dust leakage in the next use.
14