Santoemma BT350 Manual De Uso Y Mantenimiento página 15

bag full indicator
The bag full indicator switches on to show
when the dust bag needs replacing or
when there is something blocking the suc-
tion pipe (in this case, inspect the pipe and
remove the blockage).
replacing the bag
filter
Remove the small door H using the
latch, as illustrated in the figure.
Tale out the full bag, sliding the cursor L
in the direction shown by the arrow.
english
Pull out the full dust bag, as shown in M.
To insert a new bag, proceed in reverse
order.
filter replaceMent
Open the filter support and replace it
or clean it by tapping it gently (the filter
needs to be replaced about every 20
dust bags).
hepa filter replaceMent;
prefilter replaceMent
or cleaning
15