Santoemma BT350 Manual De Uso Y Mantenimiento página 17

hair-coVered strip
replaceMent
iMportant note: Before proceeding
with this operation, switch off the applian-
ce and unplug it. Use a coin or flathead
screwdriver to loosen the screw fastening
the cover completely Q. Use a tool (e.g. a
pair of pliers), to remove the hair-covered,
worn strip then replace it with another, fol-
lowing thesesteps in reverse order to fit it.
english
apppliance blockage
reMoVing obstructions froM
the eXternal hose
reMoVing obstructions froM
the carpet beater
Remove the base of the appliance (see the
appliance assembly chapter).
Check and if necessary, unblock the pipe,
using the pipe of the vacuum cleaner or a
flexible brush.
17