Publicidad
Idiomas disponibles
Idiomas disponibles
Basic Information of the Electric Pruning Shears
Operating Voltage
EN
Lithium Battery
Input Voltage of the Charger
Charging Time of the Battery
Working Time of the Battery
Maximum Power
Total Weight
Pruning Range (Maximum size)
Diameter
Working Temperature
OPERATING INSTRUCTIONS
1. Open the package and insert the battery pack into the battery pack inserts.
2. Turn on the power control switch and then the power indicator light will turn green.
3. The buzzer sounds 2 times when the power is first turned on then pull the trigger twice continuously to get
into the activated state.
4. Normal pruning: press the trigger and then the blade will close. Release the trigger and then the blade will
open. Blade closed: Keep pressing the trigger and when the buzzer rings for long, the blade is in the closed
state.
5. Before start, press the trigger at intervals to close the blade without any load for several times and check if
it is normal.
6. Start working after checked normal.
AFTER USE
1. Keep pressing the trigger, the buzzer will ring for long, release the trigger and then the blade will not open
and no longer open.
2. Turn off the power source and remove the battery pack.
3. Clear up, clean and pack.
42
INSTRUCTIONS
14.4V 2.5Ah
1.5~2H
4-5H
500W
940G
32MM Soft Branches
–10ºC~60ºC
Publicidad
