Publicidad
Idiomas disponibles
Idiomas disponibles
TIGHTNESS ADJUSTMENT OF THE BLADE
sure to cut off the power source between the shears and the battery pack
BE
before operation.
EN
Check the tightness of the blade before use. A blade with proper tightness will not swing left and right. Proper
tightness of the blade will make it labor-saving when pruning using the shears.
Caution: When the blade is closed, the blade should not have a lateral swing. Lateral swing is an abnormal
state, given it will create a gap between the two blades and causes the teeth of the gears to not properly mesh,
thus damaging the mechanical structure.
REPLACE THE BLADE
cut off the power source of the shears before operation.
PLEASE
When the entire length of the moving blade no longer coincides well with the fixed blade, or if the blade after
grinding is still not clean after cleaning, it is recommended to replace the blade. The replacement steps are
as follows:
1. For safety, please power off before replacement and remove the battery.
2. Follow the steps below to replace the blade.
3. After the replacement, clean it, connect the battery, check the power and close the blade.
47
INSTRUCTIONS
Publicidad
