Techmade FUNNY TM-K2 Manual De Usuario página 9

Microphone
- Battery: 500 mAh Lithium - Impedance: 4Ω
- Sensitivity: -42dB ± 3db
- Rated power: 6W
- Frequency range: 20hz-20Khz
Instructions for Use
1.Turn On/Off
To turn on the speaker, long press the power button.
To turn off the speaker, hold the power button for a long time.
2. Bluetooth connection
Without a memory card inserted, the speaker will turn on with the default BT
mode. Activate BT from your smartphone and start searching for devices.
At the end of the search, click on the name of the loudspeaker and associate
it. Click the speaker name, then associate the connection.
The voice guide will indicate the correct connection of the device.
3. Play/Pause
After connecting the device successfully, access your favorite music player
and start playing a song.
From now on, to play or pause, just press the power button briefly.
4. Previous/next song
To play the next song you will need to long press the volume "+" button.
Conversely, to play the previous song you will need to long press the volume
button "- ".
5. Volume adjustment
To increase the volume, briefly press the volume key "+", when the volume
is at its maximum the voice guide will indicate it.
To decrease the volume, briefly press the volume key "-", when the volume
is at its minimum the voice guide will indicate it
6. Memory card
If a memory card is inserted, the music on it will automatically play from the
speaker.
7. Reload
To charge the speaker insert the charging cable into the charging slot on the
back of the speaker. While charging, a red led above the charging slot will
light up.
Once recharging is complete, the LED will turn off.
8. Led lights
To turn off the LED lights on the top, hold down the "M" button for a long
time. To change the LED lighting mode, press the "M" button twice quickly.