Publicidad
Threading the upper thread/
Enhebrado del hilo superior
Attention:
Turn power switch to off ("O"). Raise the needle bar.
Follow completely the numbered sequence in upper
threading. Should you skip or fail to properly engage
the thread with any of the thread guides, you will not
sew properly. (1-5)
Continue to draw the thread down and into the needle
bar thread guide. Pass the thread through the eye of
the needle from front to back. Bring thread under foot
and cut thread with cutter (6).
Atenci6n:
El interrupter principal tiene que estar a ("O"). Subir
la prensatela.
I
Enhebre la aguja por las siguientes posiciones;
Guiahilos de tapa superior, regulador de tension,
muelle de tirahilos, palanca tirahilos, guiahilo del brazo,
guiahilo de la barra de aguja. (1 -5)
Enhebre la aguja pasando el hilo desde el frente hacia
el reverse por el ojo de la aguja y deje mas o menos
10 cm (4 pulgadas) hilo. (6)
Publicidad
