Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: This unit may turn off after an extended period of use. LED may remain on.
If your unit overheats, unplug the unit and let cool for 30 minutes before plugging in
again and continuing use.
CAUTION: To avoid injury and irreparable damage, always remain seated when
using massager. Never stand on the unit.
INSTRUCTIONS FOR USE
1. Insert the adapter jack into the cushion (Fig. 1), then insert the power cord into
a 120-volt AC outlet. Once plugged in the power button will begin to blink
2. It is highly recommended that you wear socks while using this foot massager.
Do not use the unit with shoes.
3. Place massager on the floor in front of your chair or seat and place feet in
massager (Fig. 2).
4. To activate massage, press the POWER button once (Fig. 3). The massage will begin
in the default settings.
TIMER BUTTON
Press the timer button to select the length of your massage. Press once
for 10 minutes, press again for 20 minutes, and press a third time for 30
minutes. If you do not select the massage length it will default to
15 minutes.
COMPRESSION BUTTON
There are 3 levels of compression intensity. The massage begins in
low intensity. Press the compression button once to move to medium
intensity and press again for high intensity. Pressing the button a third
time will return the massage to low intensity.
Fig. 1
Fig. 2
4
Fig. 3
Publicidad
