• Unzip the software file you downloaded in Step 7 and execute
the install process.
11. Follow the on-screen instructions to complete the installation.
IMPORTANT: To launch the console without administrative
!
privileges, DO NOT install it in the default folder, C:\Program
Files\Mitel. Instead, install in a folder such as C:\5550ip. Select
the same folder as the destination for files associated with the
Bulletin Board and BLF features. To allow access to these files
from multiple consoles, locate them on a shared network drive.
When installation is complete, the Configuration Wizard starts.
The wizard is used to register the console with the MCD.
NOTE: Accept the default location for the files and folders when
installing the 5550 IP Console software on Windows Vista.
You will need to:
-
-
NOTE: The Configuration Wizard can be run again to correct
errors, or following changes to information previously entered, by
clicking the Windows Start button and choosing > All Programs >
Mitel > 5550 IP Console > Tools > Configuration Wizard.
12. Reboot the PC after installation is complete.
When the console is first started, a Security Alert dialog box may
appear on PCs with Windows XP Pro Service Pack 2. The dialog
box allows you to configure the Windows firewall to unblock
incoming traffic from TCP/IP ports used by the console
(identified in the dialog box as 'java'). The console will not
function unless it is unblocked.
IMPORTANT: Permitting a program to communicate through
!
Windows Firewall makes the computer more vulnerable to
attacks by malicious users and viruses.
10
OR
enter the IP address or host name of the controller, and the
MAC address of the console keypad (the address is on the
bottom of the keypad.)
enter the Set Registration access code and the directory
number of the console unless already programmed on the
MCD.
English