Publicidad
Idiomas disponibles
Idiomas disponibles
(EN) ENGLISH
Thank you for purchasing one of the HÆGER brand remote control. For correct
operation of the product, please read the manual carefully before using the device. It
is very important that you keep this instruction manual for future reference.
It's a remote control that combines the keys of 6 different TV brands (Samsung / LG /
Philips / Sony / Panasonic / Hisense) with their respective functions, so there's no
need to configure most of the models.
BATTERIES: This product requires 2 AAA/LR03 Alkaline batteries.
1. Remove the battery cover from the body of the remote control and then insert the
batteries into the remote control as indicated in the battery compartment. Refit
the cover.
2. If you find some keys do not work as expected (or at all), proceed to the next step.
3. Press and hold the following keys of the URC around 3 seconds until LED flash
thrice and then release.
Samsung
[POWER]+
[Vol+]
4. Try the programmed functions to check if it is correct. If not, follow the above step
once more.
Resetting to Factory Code (Samsung/ LG/Sony/Philips/Panasonic)
Press and hold the [POWER] and [INPUT] key of URC around 3 seconds until LED flash
thrice and then release.
If you want a key to be adjusted to a function of your original remote control, please
follow these steps:
1. Turn on the device you want to control.
2. Press and hold down the [POWER] and [MUTE] keys on the remote control for 3
seconds until the LED lights and then release. You are in the learning function.
3. Face the IR emitter of the URC remote control with the IR emitter of the original
remote control at a distance of 2/3cm. Press the key on the URC where you want
to copy and release, the LED flashes rapidly. Then press and hold the key on the
original remote control that you want to duplicate until the LED flashes slowly three
times. This means that the learning is successful.
4. Continue with step 3 to learn more keys.
5. Press and hold the URC [POWER] and [MUTE] keys to store the learned keys. The
LED will turn off indicating that we have exited learn mode. If no key is pressed for
20 seconds, the device will automatically exit the learning mode and the LED will
turn off.
6. Test the programmed functions to verify if they are correct. If not, copy them again.
(FR) FRANÇAIS
LG
Sony
[POWER]+
[POWER]+
[Vol-]
[CH+]
Philips
Panasonic
[POWER]+
[POWER]+
[CH-]
[Up]
Hisense
[POWER]+
[1] or [2]
or [3]
Publicidad
