Descargar Imprimir esta página

Samsung NZ36C3060UK Manual Del Usuario página 18

Publicidad

Idiomas disponibles

Idiomas disponibles

Before you start
Digital display
to
,
selected heat settings.
Residual heat (Still Hot).
Residual heat.
The child lock is activated.
message. A touch key has been touched and held for more than 8 seconds.
message. The cooktop has overheated because of abnormal operation.
The cookware is unsuitable or too small or no cookware has been placed
on the cooking zone.
(Example : An element was turned on with empty cookware on top.)
message. The power applied to the cooktop is too high or low.
Safety shutoff
If the cooktop overheats because of abnormal operation,
and the cooktop will turn off.
If cookware is unsuitable, too small, or no cookware has been placed on the
cooking zone,
will be displayed.
After 30 seconds, the corresponding cooking zone will turn off.
Other reasons why a cooking zone will switch itself off
All cooking zones will switch themselves off if liquid boils over and lands on the
control panel.
The automatic shutoff will also be activated if you place a damp cloth on the
control panel. In both of these instances, you will need to turn the cooktop on
again using the main Power (
) key after the liquid or the cloth has been
removed.
18 English
Operation
Residual heat indicator
When an individual cooking zone or the cooktop is turned off, the presence of
residual heat is shown with an
appropriate cooking zones. Even after the cooking zone has been switched off, the
residual heat indicator goes out only after the cooking zone has cooled.
You can use the residual heat for thawing or keeping food warm.
WARNING
As long as the residual heat indicator is illuminated, there is a risk of burns.
WARNING
If the power supply is interrupted, the
about residual heat will no longer be available.
However, it may still be possible to burn yourself. This can be avoided by always
taking care when near the cooktop.
will be displayed
NOTE
The uppercase '
Switching the appliance on
NOTE
After the Power (
heat setting must be selected within approximately 20 seconds. Otherwise, the
appliance will switch itself off for safety reasons.
,
(for "hot") in the digital display of the
,
symbol will go out and information
' indicates higher temperatures than the lowercase '
1.
The appliance is switched on using the
Power (
) key.
Touch the Power (
approximately 1 ~ 2 seconds.
The digital displays will show
) key has been touched to switch on your appliance, a
'.
) key for
.

Publicidad

loading