Publicidad
Idiomas disponibles
Idiomas disponibles
Quick stop
Pause
The Pause function simultaneously switches all cooking zones that are switched
on to the low power setting and then back to the heat setting that was previously
set. This function can be used to briefly interrupt and then continue the cooking
process e.g. to take a telephone call.
When the Pause function is activated, all touch sensors except for the Pause,
Lock key are disabled. To resume cooking, touch the Pause sensor again.
Control Panel
To Switch On
Touch Pause
To Switch Off
Touch Pause
NOTE
Timer functions are not stopped by the Pause function.
To switch off a cooking zone, press and hold
the cooking zone sensor for 3 seconds.
Display
Return to previous power level
Using the child safety lock
You can use the child safety lock to safeguard against unintentionally turning on a
cooking zone and activating the cooking surface. Also the control panel, with the
exception of the Lock key (Only turn off control), can be locked in order to prevent
the settings from being changed unintentionally, for example, by wiping over the
panel with a cloth.
Switching the child safety lock On/Off
NOTE
•
Regardless of power on/off, child lock is activated.
•
You can use lock control during cooking. In this case, To turn off the burner,
you should operate lock off or power off.
1.
Touch and hold the Lock key for
approximately 3 seconds. An acoustic
signal will sound as confirmation.
2.
Touch any control sensor.
will appear in the displays,
indicating the child safety lock has
been activated.
3.
For switching the child safety lock off,
touch and hold the Lock key again for
3 seconds. An acoustic signal will sound
as confirmation.
English 21
Publicidad
