Descargar Imprimir esta página

Kesser K-RLS-1931 Manual De Instrucciones página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

If the mains cable or plug are damaged, they must be replaced by the manufacturer or an authorised
specialist company or similarly qualified person.
Do not attempt to repair the unit yourself.
We accept no liability for damage caused by disregarding the instructions and improper use.
When you are no longer using the appliance, pull the plug out of the socket.
Children from the age of 8, mentally, sensory and physically impaired persons may only use the
appliance if they have previously been familiarised in detail with the functions and safety precautions
by a supervisor responsible for them and understand the risks involved.
Always operate this fondue set from a grounded 220-240 V household socket.
The use of an extension cable is not recommended as it may overheat and pose a fire risk. However, if
an extension cable must be used, the cable should have a diameter of at least 0.75 mm2.
COMMISSIONING AND OPERATION
PREPARATION BEFORE USE
Take apart the pot, the forks, the stainless steel cover of the forks, the grill plate, the stone plate and
the small pans and clean them with a soft, damp cloth. Place your appliance on a flat and stable
surface. Then place the grill plate or stone plate/fondue set on the top of the appliance.
Before using the appliance for the first time, let it run for 10 minutes without food. A small amount of
smoke may form during this time. Ventilate the room during this time.
Let the griddle and mini pans cool down and clean them (see
chapter Cleaning and care).
Check that the voltage indicated on the product matches your mains voltage. Before plugging in, make
sure that the regulator is set to "MIN".
When you use this fondue set for the first time, a smell of smoke may emanate from the surface of the
heating element. This is normal due to the oily protective coating during manufacture.
OPERATION
Connect the fondue set to the mains. Turn the switch from the "MIN" position to "MAX" and the
indicator light lights up to work, then preheat the fondue set for 5 minutes.
For fondue, put the food or oil or water directly into the pot and then place it on the floor in case of
need. DO NOT LET THE PRODUCT DRY BURN and must put the food / water / oil on the pot.
When you have finished fondue, turn the switch to the "MIN" position and remove the plug from the
socket. Wait until the appliance has cooled down completely before moving or cleaning it.
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
10
www.eshopping.de
burn

Publicidad

loading