Basic Operations; Before Using; Common Operation - Kenwood KDC-MP345U Manual De Instrucciones

Basic Operations

Release
[ ]
[ ] [BAND] [VOL]

Before Using

Exit of the Demonstration Mode
Turn off the demonstration mode when you use it
for the first time after installation.
1
Press the [VOL] knob to quit the demonstration
mode when the messages "CANCEL DEMO",
"PRESS", "VOLUME KNOB" are displayed (approx.
15 seconds).
2
Select "YES" and press the [VOL] knob.
When "NO" is selected, turn the [VOL] knob.
⁄
• Demonstration mode can also be cancelled in "DEMO
MODE" of <Function Setting> (page 8).
Adjusting the Clock
1
Press the [DISP] button several times until clock
display ("CLOCK") appears.
2
Keep pressing the [DISP] button until the hour
display blinks.
3
Turn the [VOL] knob to adjust the hour.
4
Press the [VOL] knob to finish the hour adjusting.
The minute display blinks.
5
Turn the [VOL] knob to adjust the minute.
6
Press the [VOL] knob to finish the minute
adjusting.
4
|
KDC-MP345U/ KDC-MP245U
[SRC] [DISP]
[1][2] [3][4] [5][6]
[ ] [ ]
Disc slot
[ ]
Auxiliary input

Common Operation

Power and source select
Turns the power ON by pressing the [SRC]
button.
When power is ON, pressing the [SRC] button
switches among playable sources in the following
order:
Tuner ("TUNER") ➜ USB ("USB") or iPod ("iPod")
➜ CD ("CD") ➜ Auxiliary Input ("AUX") ➜ Standby
("STANDBY") ➜ Tuner ("TUNER")
Keeping pressing the [SRC] button for at least 1
second turns the power OFF.
⁄
• The source "iPod" and "CD" can be selected when each
source is ready to play.
Volume
Turning the [VOL] knob adjusts the sound
volume.
Clock display and Display scroll
Pressing the [DISP] button selects the display
mode.
Refer to <Text Display Selection> (page 7).
Keeping pressing the [DISP] button scrolls the
display.
Auxiliary input
Portable audio device can be connected with the
stereo mini-plug (3.5 mm ø).
USB Terminal