QFX TURN-105 Manual Del Usuario página 11

Note: If you couldn't find the "Microphone (USB Audio Controller or USB Audio Codec)"
or "Microphone array to USB pnp audio device/controller" from the Device list, close the
Audacity Software, make sure the usb Turntable is connected, then re-start Audacity
Software and try again.
4. Adjust the input and output volume by sliding the Input and Output Volume bars.
5. Click the record button to start recording, left and right tracks will show on your
computer screen. If you cannot see the sound waves appear on the Interface when
recording, adjust the Input volume bar.
6. Use the Audacity control panel to record or listen the music you have recorded
- Click
button to start recording.
- Click the
button to skip to start;
- Click the
button to skip to end;
- Click the
button to play;
- Click the
button to pause;
- Click the
button to stop.
EXPORT THE MUSIC FILES TO WAV OR MP3 FORMAT
Once you have finished recording, make sure you save your recorded music to the
computer.
Output Volume
11
Input Volume