Nordic DELTACO SH-CHOPO1 Manual Del Usuario página 4

ENG
Thank you for choosing Deltaco!
Bluetooth and location
It might be easier to connect if you
enable Bluetooth and location when
connecting the device to the app.
Reset
Disconnect and reconnect the power
plug 3 times to reset, the LED should
flash quickly.
Safety instructions
Additional safety instructions are
included in AC adapter manual.
1. For the IP rating to be ensured,
products with matching IP rating must
be used. I.E. a IP44 connector should be
used with another IP44 connector, and
not a IP20.
That way the connection gets sealed
properly.
Install and use
1. Download and install the app "DEL-
TACO SMART HOME" from Apple App
Store or Google Play Store on your
mobile device.
2. Launch the app "DELTACO SMART
HOME ".
3. Create a new account or log in to
your existing account.
4. Tap "+" to add the device.
5. Choose category and then the type
of product from the list.
6. Connect the device to power.
7. If the LED/lamp does not flash: Reset
the device.
If the status indicator flashes: Confirm
in the app.
4
8. Confirm the Wi-Fi network and
password.
9. Enter the device name.
The device name will be used by Ama-
zon Alexa and Google Home.
Add service to Google home
Add the device to google home.
Add the service "DELTACO SMART
HOME".
Add device to Amazon Alexa
Use the menu "Skills & Games" and
search for "DELTACO SMART HOME".
Enable the app and login. Use discover
to add the device.
Cleaning and maintenance
Do not use cleaning solvents or abra-
sives.
Do not clean the inside of the device.
Do not attempt to repair the device. If
the device does not operate correctly,
replace it with a new device.
Clean the outside of the device using a
soft cloth.
Support
More product information can be found
at www.deltaco.eu.
Contact us by e-mail: help@deltaco.eu.