Midoceanbrands MO6924 Manual Del Usuario página 2

MO6924
EN
15W round bamboo wireless charger
SPECIFICATIONS
Input: DC 9V 2A, 9V 2.22A, 5V 2A
Wireless Output DC 5V 1A, 7.5V 1A, 9V 1.1A, 9V 1.66A
Wireless distance: 0.7-1mm
Charging by wireless charger
Connect the charger with suitable power supply by using the cable
provided. Place your device on the top of the charger properly, to
avoid connection failure, we recommend that you remove the
devices protective case for optimum use, a minimum 9V input is
required for 15W wireless output, if below 9V input only 5W
wireless output is achievable, charging speeds may vary per
device and by type of power input.
After power is connected the red light is on meaning the charger is
in standby mode. When the green light on means the device is in
place and charging correctly. If metal objects are on top of charging
surface, the light will flash in green colour.