Adeo Group PR/SFTR Instrucciones De Instalación página 2

Installation instructions
Product Information
1
● Please read this instruction carefully before installation.
● Installation should be carried out by a qualified plumber.
Preparation
Phillips Screwdriver
PTFE-Tape Tape Measure
Flathead Screwdriver
Pencil Spanner
Product parts
[A]x1
[C]x2
[F]x4
2 people for
Installation
recommended
Spirit Level
8 mm Masonry Bit
Brass Tube
Electric Drill With Cover 2X
[B]x4
[D]x4 [E]x4
[G]x4 [H]x4
1
Installation
2
Step 1:
Select your desired installation position and ensure the wall is sufficiently strong to hold the
weight of the radiator. (Brick or breezeblock wall is ideal.)
[E]
x4
Mark down the screw position on the wall, then drill four holes accordingly and tap the Rawlplug
E into the wall.
Step 2:
Connect the Wall Support D to the wall with Long Screws B.
[B]
x4
[D]
x4
ENGLISH
2