Blackstone 1845 Manual Del Propietário página 13

Model 1845
S T E P 0 3
Use four (4) self tapping screws to attach two (2) door magents
to the bottom of the faceplate. Ensure that the magnetic sides are facing the
Blackstone cutout.
S T E P 0 4
Use four (4) M6x12 screws to fasten the faceplate from the rear
directly below the control knobs with the magnetic surface down. Then, use
four (4) M6x12 screws fasten the back panel to the leg assemblies. Ensure that
the inner shelf brackets are on the left side.
S T E P 0 5
Install the inner shelf
by inserting the leg in the cart base
hole, and resting the shelf on the
inner shelf brackets.
Assembly Guide | Owner's Manual
09