Zero Zero HOVERAir X1 Guia De Inicio Rapido página 3

Download App
Step 1
Scan the QR code below to download and install
Hover X1 App.
*This guide is subject to change without prior notice. Please
visit our official website for user manual and other latest
information.
iOS / Android
Charge the battery
Step 2
before you use HoverAir X1 for the first time, be
sure to charge it.
Connect the USB cable and USB power source.
When battery is being charged, LEDs will blink.
When the battery is fully charged, LEDs will be always-on or always-off
04
Always-on Always-off
Power on
Step 3
Press and hold power button for 2 seconds until the
voice prompt is heard, and the status indicator will
light on in green.
Wait for about 7 seconds, and HoverAir X1 will power on.
Mode Selection and Takeoff
Step 4
Open up the HoverAir X1 as shown below and hold it
flat in your palm.
1
Short press the mode button (behind the power button)
to select the flight mode of your choice. You can long
press the mode button to toggle parameters for each
flight mode.
2 3
05