Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO USE
This high-speed, vibrating, electric toothbrush is different from conventional
electric toothbrushes. Therefore:
* You only need to lightly press the bristles against your teeth for brushing.
+ When first using this product, some people experience a tickling or
tingling sensation caused by the high-speed vibrations.
The sensation should subside after you use the toothbrush several more
times.
1. Place the brush head firmly onto the
A
toothbrush shaft.
A
« There is a small space between
A
p
=
the brush and the main unit. This
is normal and is necessary for the
O
head to vibrate properly.
2. Apply toothpaste to the toothbrush. Then
place the toothbrush in your mouth before
turning the power on to prevent the tooth-
paste from spattering.
3. Press the on/off button for at least
1 second to turn on the toothbrush.
* When the toothbrush first starts,
the "gentle-start" function causes it
take about 2 seconds to reach its
normal speed.
4. When you have
finished brushing,
press the on/off button
to turn off the power.
e To prevent foam from
spattering, turn the
toothbrush off before
removing it from your mouth.
Brushing duration notification timer
The toothbrush stops temporarily after 2 minutes of use, and starts again.
This reminds you that you should brush your teeth for about 2 minutes.
PRECAUTION:
You may experience bleeding of the gums for the first 2 or 3 days of using
this toothbrush, but such bleeding should stop. If the bleeding persists for
more than a week, stop using this toothbrush and consult your dentist.
Publicidad
