Blackstone 6038 Manual Del Propietário página 7

Make sure the front pins are fully
Model: 6038
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Remove the four (4) protective washers from the griddle foot
STEP 04
pins� With the help of another person, place the griddle top onto
the griddle body by aligning the four foot pins to the holes on top of
the unit�
Make sure the front pins are fully
seated in the holes, then push
the griddle top back to lock the
griddle in place�
OPTION A: INSTALL AS DROP-IN WITH
INSULATING JACKET
Place the two front pins into the
front locking holes and push the
Slide the jacket left inner panel into the jacket left
STEP 05
griddle top and hood back� Then,
outer panel�
set the two rear pins into the
rear holes�
Place the jacket rear inner panel into the jacket rear
STEP 07
outer panel�
BLACKSTONEPRODUCTS.COM/SUPPORT
Make sure the front pins are fully
ASSEMBLY GUIDE
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Make sure the front pins are fully
seated in the holes, then push
the griddle top back to lock the
griddle in place�
Slide the jacket right inner panel into the jacket right
STEP 06
outer panel�
Place the two front pins into the
front locking holes and push the
griddle top and hood back� Then,
set the two rear pins into the
rear holes�
Place the jacket outer base panel onto the jacket inner
STEP 08
base panel�
| OWNER'S MANUAL
07