Blackstone 2249 Manual Del Propietário página 7

Model: 2249
With the help of another person, set the griddle body on
STEP 03
its feet�
Use one (1) shear pin [c.] and one (1) cotter pin
propane tank hanger to the upper bar of the left leg assembly�
[c.] × 1
[d.] × 1
Install the four (4) control knobs
STEP 05
place in the oFF position�
[e.] × 4
Use four (4) M6x12 screws
STEP 07
bracket (l), and one (1) side shelf bracket (R) to the left side of the
griddle body�
Repeat this step with the right side of the griddle body�
[f.] × 8
l l
R R
BLACKSTONEPRODUCTS.COM/SUPPORT
[d.] to attach the
[e.] by pushing them into
[f.] to attach one (1) side shelf
R R
l l
ASSEMBLY GUIDE
Slide the front basket U panel onto the front right leg� Use
STEP 04
three (3) M6x12 screws [f.] to attach the paper towel holder and front
basket to the leg�
(The paper towel holder arm may be removed before bracket
assembly, and reattached after bracket assembly�)
[f.] × 3
Use four (4) M6x12 screws
STEP 06
left side of the griddle body�
[f.] × 4
Thread two (2) M6 step bolts
STEP 08
left side shelf�
Repeat with the right side shelf�
[g.] × 4
| OWNER'S MANUAL
[f.] to install the side handle to the
[g.] into the upper holes of the
07