ALPENHEAT AH11 Manual página 6

EN
ALPENHEAT Bootheaters WIRELESS HOTSOLE
DE
Model: AH11 with APP-function
SK
PL
INSTRUCTIONS
SI
SAFETY INSTRUCTIONS
Keep the product out of the reach of small children, as it contains small parts which could
HR
be swallowed. This product should not be used by individuals unable to determine when
the temperature is too hot or too cold. Small children are more sensitive to hot and cold.
Certain illnesses, e.g. diabetes, can cause impaired temperature sensitivity. Persons with
SE
disabilities or infirm persons might not be able to communicate that they are too warm or
too cold. Therefore the product is not suitable for children under the age of three, the infirm
LV
or individuals insensitive to heat. If in doubt or if you have cardiovascular problems consult
your doctor before using the product. Only use the original recharger supplied with the
FR product for charging the batteries. It has been designed for indoor use only and should not
be exposed to moisture. Alpenheat products are not compatible with one another or with
products from other manufacturers, so never use chargers, heaters or battery packs from
CZ
other products. Do not insert metal or other objects into the connection sockets or plug as
this can damage the product. If you notice that the connection cables or any other parts
NL
are damaged, do not use the product. Do not make any changes to the product and do not
use it for any purpose other than intended.
FI
CHARGING BATTERIES
The integrated batteries have to be charged before each use.
IT
Batteries only reach their full capacity after having been charged several times.
To achieve the full capacity, proceed as follows:
1. Plug the Y cables of the charger into the back of both insoles. The socket for charging
RU
is next to the manual control switch and LED. Insert the charger into a household outlet.
Charge the batteries overnight prior to first use. Both insoles should be charged at the
ES
same time for about 6 hours. The insoles need to be turned off during charging.
2. The LED on the insoles indicates that the batteries are being charged.
The insoles have 4 different light states during charging:
NO
Blink red: 1 – 33% Power
Blink yellow: 34 – 66% Power
HU
Blink green: 67 – 99% Power
Full green: 100% Power
3. The insoles are now ready for use.
RS
Note: Insoles never work during charging
RO
When using the insoles for the first time or if they have not been used for a long time, the
integrated batteries should be discharged and charged. Plug the recharger into a standard
household outlet. Do not use the recharger near sources of moisture. If you are travelling
make sure the power is on and that the power to that outlet is not turned off with the light
switch, as is customary in some hotel rooms. A shaver outlet is not suitable and should not
be used.
4
ENGLISH
AT A GLANCE:
- 1 pair of insoles with integrated heating elements and batteries
- 1 USB charging cable
- 1 adaptor for USB charging cable