Publicidad
Idiomas disponibles
Idiomas disponibles
46
3.
Attach the hydraulic jack (H) to the jack plate (I) using 2 M8x20 cap screws (J) and spring washers (K). Ensure
that the jack is placed so that the handle is on he right-hand in relation to the arrow (AA) on the jack plate.
Tighten the fasteners securely using the supplied Allen key.
4.
Insert the jack plate hooks (L) through the jack plate, from the jack side, and secure with the wing nuts (M).
Hang the jack plate springs (N) from the eyelets (BB) located on the underside of the top beam of the frame.
5.
Place the jack plate assembly inside the frame and hook the jack plate springs to the hooks on he jack plate.
Ensure that the top of the hydraulic jack (CC) sits inside the retainer (DD) located on the underside of the
top beam of the frame. Adjust he wing nuts as required so the jack plate is level and the top of the hydraulic
jack is correctly located when the jack is fully retracted.
J
K
L
I
AA
CC
N
H
M
DD
BB
Publicidad
