F
ASSEMBLE THE HEADLIGHT
Clip the headlight into the fender and the front bracket and fix it with M4 * 10mm Round head screw.
Connect the line of the headlight and the line of the steering wheel with the line on the vehicle body (as shown
in the figure).
7
FIX THE M8*155MM SCREW
Use M8 * 155mm screw to connect them in series.
Turn over the vehicle body (be careful of scratches).
Put ø 10 gaskets, M8 nuts, fixed with M8 wrench.
FIX THE WHEEL/FRONT AXLE
A
Clip the wheel into the front bracket, align the wheel
L
hole with the front bracket hole and penetrate the
front axle.
Put ø 10 gaskets, M8 nuts, fixed with M8 wrench.
40