Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR USE
1. Rotate the lid counter clockwise whilst pressing the safety hat.
2. Inject water to the maximum level of the measuring
cup (300ml), then inject the water slowly into the steam
cleaner. Note: in addition to the water, do not add any other
substances; otherwise, the heating component will be
damaged and it will cause the warranty of cleaner to become
invalid.
3. When replacing the safety hat, please keep on pressing and
rotate clockwise.
If no steam is released when pressing the button, the water tank
is empty. Follow these steps
to refill the water:
a. Unplug the device.
b. If the safety lid will not open, the pressure within the tank is
still too high. Let the device cool for some time and try again.
c. When opening the lid, cover the lid with a cloth as a protection
against any spilling.
d. Open the lid slightly and let any access steam escape.
e. Refill the water tank as described before.
f. Plug the device into the socket again and wait for 3 minutes
until the control light turns off indicating that the desired
temperature is achieved.
16
Publicidad
