Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
2) FULL AUTOMATIC MODE:
The laser automatically runs a preprogrammed sequence. Select this mode when only 1 laser is used
(standalone) or when the laser is placed as the first (master) unit in a chain with several RADIANT
LASERs.
Press the FUNC-button until the display shows one of the following: SoN, AUN, Sod, AUd, SoP or AUP.
Now use the UP or DOWN buttons to select:
AUn
o
AUd
o
AUP
o
Press the ENTER-button to confirm your choice.
The laser automatically runs a preprogrammed sequence.
You can connect several RADIANT LASERs together: just put the first unit of the chain in one of the
automatic effect modes and all other units in <Slave mode= (display shows <SLA=) to make them all work in
perfect sync!
3) SLAVE MODE:
The laser follows the instructions given by the first Radiant laser (master) in the chain.
Connect the DMX input of the laser to the DMX output of the previous laser in the chain.
Press the FUNC-button until the display shows <SLA=
Press the ENTER-button to confirm your choice.
You can connect several Radiant lasers together. Please put the first unit of the chain in <Music or
automatic mode= and all other units in <Slave mode= (display shows <SLA= to make them all work in perfect
sync!
4) EASY CONTROLLER MODE:
An optional CA-8 controller can be connected so you can control the laser from a
distance. When several Radiant
connect the CA-8 controller to the first unit in the chain. All units will follow the
instructions given by the CA-8 remote.
Connect the CA-8 controller to the remote controller input (8) on the back.
Press the FUNC-button until the display shows <CA8=
Press the ENTER-button to confirm your choice.
These are the functions available on the CA-8 controller:
STANDBY button: used to put the laser in blackout (no output). The standby LED
is on during blackout.
FUNCTION button: used to select the color (original green Blue green +
Blue original)
MODE button: used to toggle two modes:
MODE LED ON: Laser is in sound mode
MODE LED OFF: Laser is in automatic mode
5) DMX512 MODE:
The laser can be controlled by any standard DMX-controller in 2 different DMX-modes:
1 CHANNEL MODE: for extremely easy setup and use! (display shows <1Ch=)
10 CHANNEL MODE: for full control of all possibilities. (display shows <10c=)
Connect the DMX input of the laser to the DMX output of the previous unit in the chain or directly to the
DMX-output of your controller.
Press the FUNC-button until the display shows: <1Ch= or <10C=.
®
JB SYSTEMS
(Automatically running random show, containing pattern and grating effects)
(Automatically running grating effects show)
(Automatically running pattern effects show)
lasers are connected in master/slave, you should
6/67
USER MANUAL
RADIANT LASER
Publicidad
