WL 1000 18.0
Symbols used in this manual
WARNING!
Denotes impending danger. Non- observance
of this warning may result in death or
extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation. Non-
observance of this warning may result in
slight injury or damage to property.
NOTE
Denotes application tips and important
information.
Symbols on the power tool
To reduce the risk of injury, read the
operating instructions!
Do not stare at operating lamp
Class III protection
Disposal information for the old
machine (see page 12)!
For your safety
WARNING!
Before using the power tool, please read the follow:
these operating instructions,
This device reflects the latest state
of engineering development and
was designed in agreement with the
recognised safety regulations.
However, when being used the device may
present a risk to the health and life of the user
or third party or damage to the device or other
objects could ensue. The lamp may only be used
as intended and in technically sound condition.
Faults that impair safety must be rectified
immediately.
The inspection light may be used only
as intended,
in perfect working order.
Faults which impair safety must be repaired
immediately.
Intended use
The inspection light is intended
– for commercial use in industry and trade,
– for illuminating distant objects and areas
requiring additional light.
Safety instructions for inspection
light
WARNING!
Read all safety warnings, instructions,
illustrations and specifications provided
with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
■ The light source of this luminaire is not
replaceable; when the light source reaches
its end of life the whole luminaire shall be
replaced.
■ Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to battery pack, picking up
or carrying the appliance. Carrying the
appliance with your finger on the switch or
energizing appliance that have the switch
on invites accidents.
■ Disconnect the battery pack from
the appliance before making any
adjustments, changing accessories, or
storing appliance. Such preventive safety
measures reduce the risk of starting the
appliance accidentally.
■ Do not direct the light beam at persons
or pets and avoid staring into the light
even from a distance.
■ To reduce the risk of injury, do not stare
at operating lamp. Serious eye injury
could occur.
■ To reduce the risk of burns, do not touch
hot lens.
■ Do not operate this light in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Light
creates heat which may ignite the dust or
fumes.
■ Recharge battery packs only with the
charger specified by the manufacturer.
A charger that is suitable for one type of
battery pack may create a risk of fire when
used with another battery pack.
9